All projects10 of 13 · Water Node
10PROTOTYPE

Water Quality Monitoring Node

  • Hardware
  • Languages

One report every 3 s

A drawing, not the device: the node is shown as a buoy for the picture. No reading values are shown.

A ripple leaves the node every 3 s, the interval at which it sends its readings over 433 MHz LoRa. Each ripple is three rings, one for each reading.

  • Solid ring: pH
  • Dashed ring: TDS
  • Dotted ring: Temperature

The problem and the idea

An ESP32 sensor node that reports water quality over long-range LoRa radio.

What I built

  • Reads pH, TDS and temperature sensors with 10-sample averaging
  • Sends readings over 433 MHz LoRa every 3 s
  • Sensor testing and calibration

The result

  • 3 sReporting interval
  • 433 MHzLoRa radio
  • 10Samples averaged per reading

One reading, from sensor to radio

  1. 1SensorspH, TDS and temperature are read.
  2. 2ESP32Ten samples are averaged into one reading.
  3. 3LoRa radioThe readings are sent at 433 MHz, every 3 s.

Set 1: ten samples, the dots, averaged into one reading, the line.

Example samples, made up for the drawing. There is no scale and no real reading here.

Stack

  • ESP32
  • LoRa (433 MHz)
  • pH / TDS / temperature sensors
  • Arduino C++